-
Platform Tilt Akwụkwọ ntuziaka
Nọmba ihe WN01SM3 Platform 120mm × 80mm (4.72″ x 3.15″) Tit Range ± 3° na θx mmezi -
X, Y Miniature Microscope Stage, 20mm (0.79″) Njem
Na RS232 Interface na enwere ike ijikwa ya site na Motion Controller WNMPC07 Series.Nha kọmpat na arụmọrụ dị elu nwere ike ịtụgharị microscope na-emekarị ka ọ bụrụ ihe bara uru nke ukwuu.
Nkwalite ụwa niile na-eme ọkwa a ka ọ bụrụ nhọrọ mara mma maka ngwa gbasara usoro ọmụmụ na nyocha. -
XY moto Linear Stage nwere arụmọrụ dị elu, 100mm (3.94 ″) Njem
Site na Interface RS232 ma enwere ike ijikwa ya site na ngagharị
Onye njikwa WNMPC07 Series.
Nha kọmpat na arụmọrụ dị elu nwere ike ịtụgharị a
Mikroskopu na-emekarị ka ọ bụrụ ihe bara uru nke ukwuu.
Nkwalite ụwa niile na-eme ka ọkwa a bụrụ nhọrọ kacha mma maka
Ngwa usoro ọmụmụ na nyocha.
Jikọta ọkwa dị iche iche iji nyere gị aka wulite oke nke
Sistemụ Multi-Axis sitere na XY ruo XYZ. -
Usoro Linear moto nwere ibu XY dị elu, njem 170mm (6.69″)
Na RS232 Interface na enwere ike ijikwa ya site na Motion Controller WNMPC07 Series.
Nkwalite eluigwe na ala na-eme ka ọkwa a bụrụ
Nhọrọ mara mma maka ngwa gbasara usoro ọmụmụ na nyocha.
Jikọta ọkwa dị iche iche iji nyere gị aka wuo obosara
Oke nke Multi-Axis Systems si XY ruo XYZ. -
Onye na-ahụ maka ngagharị WNMPC2810 Series, Ruo 8 Axes na-achịkwa n'otu
PCI-BUS
1 ruo 4-axis kaadị maka stepper motors ma ọ bụ dijitalụ servo Motors Pulse ugboro site na 0.02Hz ruo max 2MHz.
Mkpịsị aka nke ahịrị maka ọtụtụ anyụike, ntụgharị okirikiri maka anyụike abụọ.Ntinye ntinye koodu 2-CH (usoro A/B/Z)
Ugboro ntinye ihe ngbanwe ihe ruru 2MHz
Ntinye 19-CH, ntinye 24-CH
Gbanwee ihu dị ka mmalite, nwayọ na oke -
Ụlọ nyocha moto Jack 60mm Njem Elu eletrọnịkị na-ebuli elu
Nọmba ihe WN01VA60 Oke njem 60mm (2.36″) ±2mm (0.0787″) Akụkụ nke Platform 120mm x 80mm (4.72″ x 3.15″) Mechanism ụgbọala Ihe nkedo egweri Ntuziaka njem Ụgbọ okporo ígwè slide -
3-axis XYZ Rotary Stage WN302RA200
Standard stepper Motors na interface RS232.
Dakọtara na Models WNMPC08 Series of Motion Controller Rotating shafts na-eji multi-channel technology nke nhazi nkenke, na oke nkenke, nnukwu ikike na ogologo ndụ.
Iji nhazi nke ọma nke worm, mmega ahụ dị mma, ntụgharị ihu na ntụgharị nwere ike ịbụ nke na-adịghị mma na obere azụ azụ nwere ike ịbawanye ọrụ njedebe, efu mbụ, mgbanwe servo moto, tinye koodu ntinye, nabata ahaziri -
Tebụlụ ebuli elu moto dị elu 30mm nke njem kwụ ọtọ
Nọmba ihe WN03VA30 Oke njem 30mm (1.18 ") Akụkụ nke Platform 500mm x 300mm (19.69 ″ x 11.81″) Mechanism ụgbọala Gear Motor na-egweri skru Ntuziaka njem Ụgbọ okporo ígwè slide -
Ogologo ogbo njem Linear dị elu dị elu 50-500mm Ọkwa Ntụgharị Asụsụ dị elu
● Mbanye bọọlụ nke ọma nke ọma na-enye ohere ịmegharị ngwa ngwa
● Bọọlụ ahịrị kwụ ọtọ na-enye motio ahịrị kwụ ọtọ
● XY ogbo, XYZ nhazi nhazi nhọrọ
● STP-57BXG152 stepper moto chụpụrụ na interface DB9
● Mgbanwe ụlọ na ịgba ọkụ
● wheel aka maka ịnya ụgbọ ala
